Gcode 2000
Gcode2000 for Windows 95/98/2000/XP/Vista . Updated 6-18-2008
Download Gcode 2000 Alternate download site
Download
Manual.pdf
Add on to Windows Vista to see Gcode Help files Read Windows6.0 Help Files
Download problems just
Email : Arc Software for a copy.
Gcode 2000 Now reads Lines,Arcs,Rect,Circle,PolyLines,LWPolylines, Ellipse, Sorts object by size. Reads and writes DXF files.Supports Mechanical desktop, AutoCAD 10,11,12,13,14,2000,2004,2007 Autosketch, TurboCad, DesignCad, AshlarVellum, CorelDraw, Intelicad and SolidWorks. ( Also runs in Linux under Wine ) A note to International users.
Set the decimal delimiter to a period from the Control panel under Regional settings.
The Machine you install this program on does not need to be connected to the internet.
The Zip file you download is small enough to fit on a floppy disk.
The program will not install from "My Documents" when Installing on Windows XP / Vista
Use a temporary folder such as C:\Temp
Gcode is specifically designed for converting AutoCAD drawings into G-Code programs for use with any 2-D or 3-D machine such as Wire EDMs, Laser Etchers, Flame cutting, Milling , Lathes etc. Also Gcode can be used for creating individual complicated tool paths for 2-D and 3-D machines. Gcode is a low cost opportunity for small independent machine shops to convert their drawings into useful programs for their CNC and DNC equipment without the hassle of figuring out the geometry manually. Version 2000 adds 3d contouring and files up to 1 million lines. Bi-directional Rs232 Serial communication is provided to hard wire the PC to the machine tool.
Simply draw the outline of the part on a dedicated layer.
Then DXF out the file. Close Autocad and then
Load the DXF file into Gcode 2000 which will process plot it and generate the gcode file.
Many copies of these programs are in use world wide
Fax 704 630 9544